On November 12, 2026, VulnCheck (acting as CNA) filed four CVEs in NVD against XWEB EVO, the web-based supervisor in Copeland's Dixell line. Three are rated 9.8, the fourth 9.1. All four can be exploited without authentication, and two hand an attacker command execution as root.
The detail that changes the response sits at the end of every NVD description: this product line reached its end of service date in March 2026. Don't wait for a patch for recent versions. The answer is network isolation and replacement.
| CVE | Flaw | Versions (NVD description) | CVSS 3.1 (VulnCheck) |
|---|---|---|---|
| CVE-2026-124004 | Hard-coded administrator password (CWE-798) | before 5.6.2 | 9.8 |
| CVE-2026-124010 | Command injection in setuid-root xwconsole.cgi (CWE-78, CWE-250) | before 5.6.2 | 9.8 |
| CVE-2026-124002 | Pre-auth command injection in the username field (CWE-78, CWE-306) | 5.2.3 up to, not including, 5.7.0 | 9.8 |
| CVE-2026-124014 | Unauthenticated configuration file write (CWE-306) | 4.3.0 through 5.8.8 | 9.1 |
VulnCheck also provides CVSS 4.0 scores: 9.3 for the first three, 8.8 for CVE-2026-124014. NVD has marked all four as Deferred, so there is no NIST analysis and no CPE configuration. None is in the CISA KEV catalog at the time of writing.
CVE-2026-124004: a password everyone now knows
Vector: AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H (9.8)
Before 5.6.2, the built-in Administrator account accepts a password hard-coded into the product. The NVD description prints it in full. A single login request yields a complete admin session.
Once a credential like that lands in a public database, assume every exposed instance on a vulnerable version will be tried. Few scans are easier to automate.
CVE-2026-124010: xwconsole.cgi, setuid root
Vector: AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H (9.8)
The xwconsole.cgi CGI runs with the setuid root bit set. Its sh parameter goes unsanitized into popen(). An unauthenticated attacker runs any command they like, as root. Affected: everything before 5.6.2.
CWE-250 (execution with unnecessary privileges) names the underlying problem: an ordinary injection bug becomes full system compromise when the binary runs as root.
CVE-2026-124002: injection before the password check
Vector: AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H (9.8)
On versions 5.2.3 up to 5.7.0, the username field in login.lua, cleanout.lua and api.lua accepts shell metacharacters, and that input is processed before the password is checked. Combined with the wlua interpreter, also setuid root, the injected commands run with root privileges.
That matters if you thought 5.6.2 or a later 5.6.x release had you covered: it clears CVE-2026-124004 and CVE-2026-124010, but this one runs until 5.7.0.
CVE-2026-124014: configuration open to anyone
Vector: AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H (9.1)
config.lua accepts a POST with action=set and no session check at all, then writes the raw request body to /etc/xwebconfig.json. action=get is reachable without authentication too. An attacker can:
- tamper with configuration values such as the
modelandpluginfields; - push the system into a
SYSTEM_NOT_CONFIGUREDstate, which is a denial of service.
This is the only one whose range runs through 5.8.8, and the description names no fixed version.
Affected versions
| CVE | Affected | First version outside the range |
|---|---|---|
| CVE-2026-124004 | before 5.6.2 | 5.6.2 |
| CVE-2026-124010 | before 5.6.2 | 5.6.2 |
| CVE-2026-124002 | 5.2.3 up to 5.7.0 | 5.7.0 |
| CVE-2026-124014 | 4.3.0 through 5.8.8 | none stated |
These bounds come from the VulnCheck descriptions, not from a NIST analysis. They tell you where each flaw stops, not which version is "safe": per NVD, no listed version escapes CVE-2026-124014. The NVD references point to Copeland's Dixell software update page and the March 2026 end-of-service bulletin. Check there for what the vendor still offers.
Detection
- Exposure: given CVE-2026-124004, treat an XWEB EVO reachable from the internet as compromised until shown otherwise.
- Web logs: requests to
xwconsole.cgicarrying anshparameter, or tologin.lua,cleanout.luaandapi.luawith characters such as;,|,$(or backticks in the username. - POST requests to
config.luawithaction=setfrom hosts that aren't admin workstations. - Administrator sessions from unfamiliar addresses.
/etc/xwebconfig.jsonchanged with no known change request, or a unit suddenly stuck inSYSTEM_NOT_CONFIGURED.- Outbound traffic initiated by the supervisor itself.
Mitigation
1. Take the interface off the internet now
No complete fix is coming for an end-of-service product. The web interface should only be reachable from a dedicated management network, behind a VPN or a jump host.
2. Get to at least 5.7.0
If the vendor still offers it for your hardware, it takes the device out of the ranges for CVE-2026-124002, 124004 and 124010. It does nothing for CVE-2026-124014, so isolation still matters.
3. Plan the replacement
A networked device that won't get any more patches, with four critical unauthenticated flaws on its record, belongs in the refresh plan, not routine maintenance.
4. If you suspect compromise
- Assume the attacker may have had a root shell: an upgrade won't remove what they left behind
- Compare
/etc/xwebconfig.jsonagainst a known-good backup - Rotate every credential the supervisor stores or uses
- Review traffic between the supervisor and the rest of the network
Why continuous monitoring matters for end-of-service devices
Building and facility supervisors often fall outside the IT inventory: installed by a contractor, never updated, rarely tracked. That's exactly the kind of product where four critical CVEs show up after support has ended.
With cveo.tech, add those devices to your inventory with their exact version and get an automatic alert as soon as a CVE that affects them is published.